Flat Cable EMI Suppression Cores (2643168751)
43 FULL FLAT CABLE CORE
43 Material
Suppression Components
Cable Component
Printer Friendly Data Sheet
Check Stock
Part Number: 2643168751
43 FULL FLAT CABLE CORE
Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
Flat cable suppression core can accommodate multi-conductors flat cables, in widths from 12.7 mm (0.500) up to 77 mm (3.0). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz to hundreds of MHz.
Our Expanded Cable & Suppressor Kit (part number 0199000005) contains a selection of these flat cable cores and clips.
Flat Cable Cores are available in selected sizes in the Flex Circuit & Ribbon Cable Core Kit (part number 0199000038).
Assembly clips are available for most of the split flat cable cores. See section Flat Cable Cores Assembly clips.
Weight: 13 (g)
| Dim | mm | mm tol | nominal inch | inch misc. |
| A | 25.4 | ±0.75 | 1 | _ |
| B | 17.8 | ±0.50 | 0.7 | _ |
| C | 12.7 | ±0.40 | 0.5 | _ |
| D | 10.15 | ±0.25 | 0.4 | _ |
| E | 2.55 | ±0.25 | 0.1 | _ |
| Cable Information | |||
| Max Diameter | Max Dimension | Solid Equivalent | Flat Cable Cores |
| 0 0 | 17.30 x 2.30 | _ | - |
Chart Legend
+ Test frequency
•For assembly clips see Flat Cable Cores Assembly Clips
| Typical Impedance (Ω) | |
| 10 MHz | 36 |
| 25 MHz+ | 56 |
| 100 MHz+ | 90 |
| 250 MHz | 142 |
Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.
Centered, single turn impedance tests for the 31 and 43 material parts are performed on the E4990A Impedance Analyzer. All tests are made with the shortest practical wire length.
| Typical Impendance (Ω) | |
| 10 MHz | 31 |
| 25 MHz+ | 50 |
| 100 MHz+ | 95 |
| 250 MHz | 200 |
Ferrite Material Constants
Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file